Xantrex XPower 1000 Plus, Owner'S Manual

Page: 19 / 72

AC Panel
445-0145-01-01 2–3
AC Panel
Figure 2-1 AC Panel ( XPower 1750 Plus shown)
Feature Description
1
On/Off Switch
turns the inverter’s control circuit on and off. This switch is not a power
disconnect switch. Disconnect AC and DC power before working on any circuits connected
to the inverter.
2 Fault light is a red light indicating the inverter has shut down due to low or high battery
voltage, unit overload, or overtemperature.
Ø
Power light is a green light indicating the On/Off Switch is on and AC voltage is present
at the inverter’s AC outlets.
3
INPUT VOLTAGE DISPLAY
indicates battery voltage.
4 AC Outlets: 2-Prong and
μ
3-Prong XPower 1200 Plus delivers a combined total of
1000 watts of continuous AC power across three outlets. XPower 1750 Plus delivers a
combined total of 1500 watts of continuous AC power across three outlets.
5 OUTPUT POWER INDICATOR
•
The indicator should be in the green area for continuous operation.
• If the indicator is in the yellow area, the inverter will operate for several minutes and
then shut down.
• If the indicator is in the red area, the inverter has reached the maximum allowable
power and is close to the output power shutdown limit.
6 Remote Switch Jack (not shown) is on the bottom of the inverter, and it is the connection
point for the optional Remote On/Off Switch.
7 Mounting Flanges allow you to mount the inverter permanently.
±
μ
æ
¨
Ø
XPower 1200 Plus 1750 Plus.book Page 3 Friday, October 21, 2005 4:19 PM