![background image](http://html1.mh-extra.com/html/xantrex/xkw-600-1-7/xkw-600-1-7_operating-manual_3375359028.webp)
Installation
Returning Power Supplies to the Manufacturer
26
Operating Manual for XKW 1kW Series Power Supply
Packaging for
Shipping or
Storage
Follow these instructions to prepare the unit for shipping or storage.
1. When returning the unit or sending it to the service center, attach a tag to the unit
stating its model number, available from the front panel label, and its serial
number, available from the rear panel label. Give the date of purchase and an
invoice number, if you have it, as well as a brief description of the problem.
2. For storage or shipping, repack the power supply in its original container. If the
original container is not available, seal the unit in a plastic bag and then pack it
in a 200 lb. (90 kg) test, corrugated cardboard carton large enough to allow 2 in.
(5 cm) of cushioning material to surround the unit. Use a material such as foam
slabs or chips.
3. Label the carton as shown in
Figure 2.1
.
4. If shipping, mark the address of the service center and your return address on the
carton.
5. If storing, stack no more than eight cartons high. Check the storage temperature
range and storage altitude specification in
“Environmental Specification” on
page 20
.
Figure 2.1
Shipping or Storage Carton Label
POWER SUPPLY
Model Number:
Serial Number:
FRAGILE — ELECTRONIC EQUIPMENT
Summary of Contents for XKW 600-1.7
