Installation
975-0136-01-01
11
Installing the Network
Before You Begin the Installation
•
Read the entire section before installing the network. It’s important to
plan your installation from beginning to end.
•
Assemble all the tools and materials you require for the installation.
Installation Tools and Materials
Tools
You will need the following tools to install the network cables.
❐
Phillips screwdriver, appropriately sized
❐
Drill and 1/8
"
bit
Materials
You will need the following materials to complete your installation.
❐
CAT 5 cables (available from Xantrex or computer supply stores)
❐
Network connectors, if installing multi-drop backbone layout
❐
# 6 screws, 2 per each network connector installed
❐
Terminators
Important:
Do not mix the two types of network layouts. Mixed
configurations are not supported by Xantrex.
Important:
Installing and replacing Xanbus-enabled devices in an existing
system must be performed with the Xanbus System in Safe mode. See “Putting
the System in Safe Mode” on page 16.
Summary of Contents for Xanbus System
