Installing the Truecharge™ 2 Battery Charger
975-0402-01-01
2–23
This guide for use by qualified installers only
10. When all connections are completed, push the wiring and
connectors inside the AC wiring compartment.
11. Place the strain relief on the AC wiring access hole.
12. Install the wiring compartment cover to fasten the strain
relief and tighten the screw on top to secure the cover. Do
not over-tighten.
13. Proceed to “Mounting the Optional Remote Panel” on
page 2–26, if you have the optional remote panel.
14. Connect the AC supply wiring from the charger to the
AC panel feeding the charger.
15. Connect the line conductor to the breaker, the neutral to
the neutral bus, and the ground to the ground bus.
16. Secure cables in place using tie-wraps or cable straps
according to electrical codes.
screw to secure the
wiring compartment
cover
AC wiring access hole
with strain relief
electronic components distributor
