Safety
viii
975-0402-01-01
This guide for use by qualified installers only
4. To avoid a risk of fire and electric shock, make sure that
all wiring is in good condition and is not undersized. Do
not operate the Truecharge™ 2 Battery Charger with
damaged or substandard wiring.
5. Do not operate the Truecharge™ 2 Battery Charger if it
has received a sharp blow, been dropped, has cracks or
openings in the enclosure including if the fuse cover has
been lost, damaged, or will not close, or otherwise
damaged in any other way. If the Truecharge™ 2 Battery
Charger is damaged, see the Warranty section under
Truecharge™ 2 Battery Charger Owner’s Guide (doc.
part number: 975-0401-01-01).
6. Do not disassemble the Truecharge™ 2 Battery
Charger—there are hazardous voltages within. It contains
no user-serviceable parts. See the Warranty section under
Truecharge™ 2 Battery Charger Owner’s Guide (doc.
part number: 975-0401-01-01) for instructions on
obtaining service. Attempting to service the
Truecharge™ 2 Battery Charger yourself may result in a
risk of electrical shock or fire and will void the warranty.
Internal capacitors remain charged after all power is
disconnected.
7. To reduce the risk of electrical shock, disconnect both
AC and DC power from the Truecharge™ 2 Battery
Charger before attempting any maintenance or cleaning
or working on any circuits connected to the Truecharge™
2 Battery Charger. Turning off using the on/standby
button on the remote panel will not reduce this risk.
8. The Truecharge™ 2 Battery Charger must be provided
with equipment-grounding conductors connected to the
AC input ground and to the DC chassis ground.
electronic components distributor
