Safety
975-0402-01-01
xi
This guide for use by qualified installers only
14. For flooded non-sealed batteries, add distilled water in
each cell until battery acid reaches the level specified by
the battery manufacturer. This helps to purge excessive
gas from cells. Do not overfill. For a battery without
removable cell caps, carefully follow manufacturer's
instructions.
BATTERY CHARGER LOCATION
15. Locate the Truecharge™ 2 Battery Charger unit away
from batteries in a well ventilated compartment.
16. Never place the Truecharge™ 2 Battery Charger unit
directly above batteries; gases from a battery will corrode
and damage the charger
17. Never allow battery acid to drip on the charger when
reading gravity, or filling battery.
18. Do not operate the charger in a closed in area, or restrict
the ventilation in any way.
19. Do not place a battery on top of the charger.
20. For North American marine installations, external
connections to the charger shall comply with the United
States Coast Guard Electrical Regulations (33CFR183,
Sub Part I).
electronic components distributor
