![background image](http://html1.mh-extra.com/html/xantrex/tr1512-120-60/tr1512-120-60_installation-manual_3342691033.webp)
I
n
v
e
r
t
e
r
M
oun
t
i
ng
975
-
0367
-
01
-
01
2
–
3
This manual for use by qualified installers only
To secure the Trace Series to the mounting location using standard size
construction stud material or plywood:
1. Repeat steps 1 through 3 above. See Figure 2-2 and Figure 2-3.
2. Place a pre-cut construction stud (flat side against the wall) on the marked
location and drill pilot holes through the construction stud and wall studs.
3. Secure the construction stud with #10 wood screws or equivalent. Wood
screw must penetrate 1
½
in. (38 mm) into the wall studs as shown in Figure
2-2.
4. Measure 7 5/8 in. (19.4 cm) from the center of the first construction stud and
draw another level line. Place the center of the second construction stud over
this line and secure to the wall as described in Step 5.
5. Using the dimensions illustrated in Figure 2-1, drill mounting holes into the
center of the construction studs for the inverter.
6. Secure the inverter to the constriction studs using
¼
x 1
½
in. (6.5 mm x
38 mm) lag bolts and washers or equivalent.
Fi
g
ur
e
2-2
M
oun
t
i
ng
on
Con
s
t
r
u
c
t
i
on
S
t
ud
s
http://www.wholesalesolar.com/inverters.html
http://www.wholesalesolar.com/inverters.html
Summary of Contents for TR1512-120-60
