![background image](http://html1.mh-extra.com/html/xantrex/tr1512-120-60/tr1512-120-60_installation-manual_3342691044.webp)
I
n
s
ta
ll
at
i
on
2
–
14
975
-
0367
-
01
-
01
This manual for use by qualified installers only
U
s
i
n
g
t
h
e
C
O
M
P
o
r
t
The COM port has two different functions. It can either be used to connect a COM
cable to provide serial communications to an optional Xantrex remote control unit
(
TR
-
REMOTE
ON
/
OFF
SWITCH
) or it can be used to connect the included series
stacking cable for when two Trace Series units are used in a series configuration
(see “Series Stacking” on page 2–24). There is one COM port, so you cannot use
both stacking interface and remote at the same time.
To use the COM port:
1. Connect one end of the COM cable or series stacking cable in to the COM
port located on the DC end of the Trace Series.
If the
TR
-
CONDUIT
BOX
is used, make sure that the cable is correctly routed
through the conduit.
2. Connect the other end of the COM cable into the
TR
-
REMOTE
ON
/
OFF
SWITCH
remote control unit or connect the other end of the series stacking cable in to
another Trace Series unit.
http://www.wholesalesolar.com/inverters.html
http://www.wholesalesolar.com/inverters.html
Summary of Contents for TR1512-120-60
