2. Plan and prepare where you would install the solar panels.
PRO TIP:
Place end of module aligned to
marked line. Peeloff around 12 inches of liner
from below module, making sure it is aligned.
Partially remove and stick the module on in 1
foot increments, making sure module
conforms to the surface.Rollout the module
with rubber roller or microfiber rag.
NOTICE
GENERAL PRECAUTIONS
l
Select a mounting surface on the roof of your vehicle that is
firm, thick, rigid, and able to support the solar panel and
mounting hardware.
l
Surface must be at least 60 °F (15 °C).
l
Do not select a roof location within 1 m (3 ft) of the front of the
vehicle to reduce wind lift forces during motion.
l
Do not mount the solar panel near other roof fixtures that can
obstruct direct exposure to sunlight.
Failure to follow these instructions can result in physical
damage to vehicles and property.
a.
Unpack the solar panels and prepare all installation tools and
materials.
b.
Prepare the mounting surface by removing dust, dirt, and
debris.
l
Observe and measure surface obstructions on the
installation surface, if any.
l
Determine which areas need extensive cleaning.
l
Use the filling foams (provided in the kit), if the
installation surface is ridged and not flat. Contact your
dealer for further suggestions.
c.
Apply a cleaner to the mounting surface.
l
Soak a microfiber rag with the chosen cleaner.
l
Choose isopropyl alcohol, acetone, or a residue-free
industrial surface cleaner/degreaser.
l
Remove any substance that could hinder adhesion.
l
If needed, apply the cleaner directly to the surface.
l
Ensure there is no residue left on the mounting surface.
d.
Mark mounting location of panel.
6
975-1172-01-01 Rev A
August 2023