c.
Connect the red pos (+) and black neg (–) battery cables to the
charge controller.
d.
Route the battery cable inside the vehicle and connect the red
pos (+) and black neg (–) battery cables to the respective
battery terminals.
e.
Secure all cables with clamps (and/or cable ties) and additional
strain-relief as necessary.
f.
Connect the red pos (+) and black neg (–) PV cables to the
solar panel using the MC4-type connectors.
g.
Route the PV cables through the roof entry point and connect
the red pos (+) and black neg (–) PV cables to the charge
controller.
h.
Clear the roof and the cable routes of tools and other debris
that may have been left during installation.
6. Operate and maintain the system.
a.
Remove the blanket (or the packaging box) covering the solar
panel to start energizing the solar panel.
b.
Refer to
Solar Panel Maintenance and Care on page 13
for
best practices.
12
975-1172-01-01 Rev A
August 2023