14
Symptom
The AC product runs for more than one minute, then the fault
light turns on. The inverter is warm or hot to touch.
AC product will not operate, no inverter lights are on.
Symptom
Lighter in lighter socket works, but the inverter does not.
Symptom
Lighter in lighter socket does not work.
Possible cause
Suggested Remedy
The PROwatt 150 has over-
heated due to poor ventila-
tion.
Ensure the ventilation is not
restricted around the inverter and
allow it to cool for ten minutes.
Turn the inverter off. Turn it on
again in five seconds.
Possible cause
Suggested remedy
Poor contact with lighter socket
or 12 volt outlet.
Press plug firmly into socket. Clean plug or
socket if necessary.
Inverter has been connected with
reverse DC input polarity.
Probable inverter damage has occurred.
Have unit repaired.
Possible cause
Suggested Remedy
Lighter socket or 12 volt outlet
may require ignition to be
switched on.
Turn key to accessory position.
Summary of Contents for PROwatt 150
Page 1: ...PROwatt 150 DC to AC Power Inverter Owner s Guide ...
Page 23: ...23 ...