CV/SV/Audio
to HDMI Format
Converter
Operation Manual
VHC-1
VHC-1 is designed for converting composite/S-Video to
HDMI 480i or 576i.
It allows you to connect your old video sources with CV,
SV output only to the new HDMI display.
Features:
- Automatically recognizes input source system.
- Suitable for worldwide video system of NTSC3.58, NTSC4.43, PAL,
PAL-M, PAL-N and SECAM.
- Supports composite and S-Video inputs.
- Combines your analog video and audio inputs and converts it
to HDMI.
- The output resolution is an digital HDMI 480i or 576i.
- Power-down mode.
- Simple plug and play unit.
Specificates:
- Input:
1 x Composite video RCA jack 75 ohm 1 Vpp
1 x Super video 4 mini-din : Y: 1 Vpp 75 ohm
C: 0.286 Vpp burst signal 75 ohm
There is an Input Select button on the top cover.
The LED indicates which source is being selected:
Green LED: CVBS,
Red LED: S-video,
Flicker: No Sync.
1 x stereo audio phone jack 350m Vrms
- Output:
1 x HDMI female port (single link/ Type A)
- Power supply: 5VDC 350mA,
- Weights: 0.16kgs.
- Dimensions: 145 W x 90L x 32H mm.
Note: Some of the HDMI displays don't support 480i or 576i;
therefore can not be used with this device.
Front Panel Rear Panel
1.S-Video Input:
Use an S-Video cable to connect the S-Video output of the
Source Video equipment to the connector labeled "SV" on the
side of the VHC-1.
2.Composite Input:
Use a Composite cable to connect the Composite output of the
Source Video equipment to the connector labeled "CV" on the
side of the VHC-1.
3.Stereo Audio Input:
Use a Phono-RCA audio cable for connecting to the L/R output
of the Source.
4.DC Power Jack:
5V 1A DC Power input.
5.HDMI Output:
Connect to the HDMI input of your display.
Connection and Installation:
1
2
Audio
In
INPUT
SV/CV
1
2
3
DC 5V
In
HDMI Output
4
5
iPod
DVD
X BOX 360
LCD MONITOR
LCD TV
VHC-1
