13
5 Troubleshooting
This section describes problems you may encounter. It describes the
symptoms of each problem and its possible causes, then suggests
various remedies.
AC product will not operate, red fault light is on.
Symptom
An AC product is plugged in or turned on and operates for
one to ten seconds.
Symptom
The AC product will not operate, the fault light illuminates
when inverter is turned on, or the load is turned on/plugged in.
Possible cause
Suggested Remedy
The AC product connected is
rated at more than 150 watts;
overload shutdown has
occurred.
Use product with a power rating
less than 150 watts (or 120 volts/
1.25 amps).
The AC Product is rated at
less than 150 watts; high
starting surge has caused
overload shutdown.
The product exceeds the inverter’s
surge capability. Use a product
with starting surge power within its
capability.
Possible cause
Suggested Remedy
Battery is discharged.
Recharge battery.
Excessive battery voltage.
Check charging system.
Summary of Contents for PROwatt 150
Page 1: ...PROwatt 150 DC to AC Power Inverter Owner s Guide ...
Page 23: ...23 ...
