![background image](http://html1.mh-extra.com/html/xantrex/prosine-ps2-5-and/prosine-ps2-5-and_installation-and-operation-manual_3290836005.webp)
ii
Prosine 2.5/3.0 Installation & Operation Guide
12. WARNING—RISK OF EXPLOSIVE GASES
a) WORKING IN THE VICINITY OF A LEAD-ACID BATTERY IS DAN-
GEROUS. BATTERIES GENERATE EXPLOSIVE GASES DURING
NORMAL BATTERY OPERATION. BEFORE INSTALLING OR
USING YOUR INVERTER/CHARGER, READ THIS MANUAL AND
FOLLOW THE INSTRUCTIONS EXACTLY.
b) This equipment contains components which tend to produce arcs or sparks.
To prevent fire or explosion do not install in compartments containing bat-
teries or flammable materials or in locations which require ignition pro-
tected equipment. This includes any space containing gasoline-powered
machinery, fuel tanks, or joints, fittings, or other connection between com-
ponents of the fuel system.
c) To reduce the risk of battery explosion, follow these instructions and those
published by the battery manufacturer and the manufacturer of the equip-
ment in which the battery is installed.
13. PRECAUTIONS WHEN WORKING WITH BATTERIES
a) Someone should be within range of your voice or close enough to come to
your aid when you work near a lead-acid battery.
b) Have plenty of fresh water and soap nearby in case battery acid contacts
skin, clothing, or eyes.
c) Wear complete eye protection and clothing protection. Avoid touching eyes
while working near battery.
d) If battery acid contacts skin or clothing, wash immediately with soap and
water. If acid enters eye, immediately flood eye with running cold water for
at least 20 minutes and get medical attention immediately.
e) Baking soda neutralizes lead-acid battery electrolyte. Keep a supply on
hand in the area of the batteries.
f) NEVER smoke or allow a spark or flame in vicinity of a battery or engine.
g) Be extra cautious to reduce risk of dropping a metal tool on the battery. It
might spark or short-circuit the battery or other electrical part that may
cause an explosion.
h) Remove personal metal items such as rings, bracelets, necklaces, and
watches when working with a lead-acid battery. A lead-acid battery pro-
duces a short-circuit current high enough to weld a ring or the like to metal,
causing a severe burn.
i) Use the Prosine inverter/charger for charging a LEAD-ACID battery only.
Do not use the Prosine inverter/charger to charge nickel-cadmium or dry-
cell batteries commonly used with home appliances and electronic equip-
ment. These batteries may burst and cause injury to persons and damage to
property.
j) NEVER attempt to charge a frozen battery. Charging a battery when its
temperature is below 32° F (0° C) is inefficient and ineffective. If possible,
gradually warm the battery above 32° F (0° C) before charging.
Summary of Contents for Prosine PS2.5 and
