background image

153553

WA–1

For use by qualified technicians only

Warranty and Return Information

Warranty

What does this warranty cover and how long does it last?

This Limited Warranty is provided by 

Xantrex Technology Inc. ("Xantrex") and covers defects in workmanship and materials in your GT 

Series Three Phase Ethernet Communications Kit. This Warranty Period lasts for five (5) years from the 

date of purchase at the point of sale to you, the original end user customer, unless otherwise agreed in 

writing. You will be required to demonstrate proof of purchase to make warranty claims.
This Limited Warranty is transferable to subsequent owners but only for the unexpired portion of the 

Warranty Period. Subsequent owners also require original proof of purchase as described in "What 

proof of purchase is required?"

What will Xantrex do? 

During the Warranty Period Xantrex will, at its option, repair the product (if 

economically feasible) or replace the defective product free of charge, provided that you notify Xantrex 

of the product defect within the Warranty Period, and provided that Xantrex through inspection 

establishes the existence of such a defect and that it is covered by this Limited Warranty. 
Xantrex will, at its option, use new and/or reconditioned parts in performing warranty repair and 

building replacement products. Xantrex reserves the right to use parts or products of original or 

improved design in the repair or replacement. If Xantrex repairs or replaces a product, its warranty 

continues for the remaining portion of the original Warranty Period or 90 days from the date of the 

return shipment to the customer, whichever is greater. All replaced products and all parts removed from 

repaired products become the property of Xantrex.
Xantrex covers both parts and labor necessary to repair the product, and return shipment to the customer 

via a Xantrex-selected non-expedited surface freight within the contiguous United States and Canada. 

Alaska,Hawaii and outside of the United States and Canada are excluded. Contact Xantrex Customer 

Service for details on freight policy for return shipments from excluded areas.

How do you get service?

If your product requires troubleshooting or warranty service, contact your 

merchant. If you are unable to contact your merchant, or the merchant is unable to provide service, 

contact Xantrex directly at:

Direct returns may be performed according to the Xantrex Return Material Authorization Policy 

described in your product manual. For some products, Xantrex maintains a network of regional 

Authorized Service Centers. Call Xantrex or check our website to see if your product can be repaired at 

one of these facilities.

What proof of purchase is required?

In any warranty claim, dated proof of purchase must 

accompany the product and the product must not have been disassembled or modified without prior 

written authorization by Xantrex. 

Telephone: 1 800 670 0707 (toll free North America)

1 408 987 6030 (direct)

Fax:

1 800 994 7828 (toll free North America)
1 360 925 5143 (direct)

Email:

[email protected]

Website:

www.xantrex.com

Ethernet.book  Page 1  Thursday, May 29, 2008  4:20 PM

Summary of Contents for GT Series Three Phase Ethernet Communications...



























Reviews: