![background image](http://html.mh-extra.com/html/xantrex/gsm-rev-a/gsm-rev-a_manual_881399022.webp)
16
©2001 Xantrex Technology Inc.
3.0 OPERATION
Internal Sticker
Please refer to the component layout sticker located inside the front
cover. This label can be used as a quick reference for component location and
fuse sizing information.
9
1
TB1
LED1
LED2
J1
PN
110-
0035 -
-
LED3
RY7
F3
F2
F1
R1
R2
R3
NC
C
C
NO
NO
NO
C
NC
NC
R4D1
RELAY
RELAY
RY8
RELAY
RY11
SW 1
SW 2
Terminal Block wire size: 14-28 AWG
Interconnect cable (J1):
WARNING:
DO NOT OPERATE WITH COVER REMOVED.
HAZARDOUS VOLTAGES MAY BE PRESENT.
SW1
SW1
SW2
Connect to Gen Port of
Trace Inverter
SUPPLIED FUSE RATING: 6.3 AMP 250VAC
FUSE TYPE: 5mm X 20mm
MAXIMUM RELAY CONTACT RATINGS: (RESISTIVE LOAD)
10 AMPS @ 250VAC
8 AMPS @ 30VDC
FUSE SHOULD BE SELECTED FOR PROPER
PROTECTION OF CONNECTED DEVICES.
GSM - GENERATOR START MODULE
Wire strip length: .25" (6mm)
(DO NOT EXCEED RELAY CONTACT RATING)
™
PN: 270-0023-01-02
Figure 14
Internal Component Identification Sticker
Danger Label
A danger label is included with the GSM to warn service personnel that
the generator may suddenly start without warning (due to an inverter com-
mand). Place this label close to the generator where it can easily be seen.
GENERATOR HAS AN AUTO START SYSTEM WHICH
MAY CAUSE THE GENERATOR TO START WITHOUT
WARNING
DISABLE GENERATOR AUTO START BEFORE SERVICING
AUTO START SYSTEM
GENERATOR
270-0025-01-01
Figure 15
Danger Label
Summary of Contents for GSM - REV A
Page 2: ......