![background image](http://html.mh-extra.com/html/xantrex/gsm-rev-a/gsm-rev-a_manual_881399020.webp)
14
©2001 Xantrex Technology Inc.
Communication Cable
The GSM is supplied with a 25-foot, telephone-type, cable with RJ11
connectors on each end.
NOTE: Longer cable lengths are available from Xantrex: part
Numbers TC/50 for 50 feet (15.24 m) and TC/100 for 100 feet (30.48
m).
Route the telephone-type cable through one of the knockouts fitted with a
strain relief (or conduit).
Connect one end of the cable to the jack labeled J1 on the GSM
circuit board.
Connect the other end of the cable to the jack labeled GEN inside the
inverter (refer to the inverter/chargers operators manual for location).
Reinstall the cover on the GSM using the two Phillips screws.
Reinstall the inverters cover.
NOTE: Recheck all wiring before proceeding to the OPERATION
section.
2.0 INSTALLATION
Figure 13
J1 Control Signal Connection
J1 Connector
Communication
cable to inverter
Summary of Contents for GSM - REV A
Page 2: ......