![background image](http://html1.mh-extra.com/html/xantrex/grib-and-ethernet-interface/grib-and-ethernet-interface_operating-manual_3352634037.webp)
Configuring the Device Using DeviceInstaller
M370078-06
2-13
2. Click
Search
to get a list of all the XG devices that can be reached
from the network adaptor that you previously selected. If your XG
unit (s) are powered up, they should appear in this list.
After a short delay, your power supply will be found. See
Figure 2-15. If the power supply is not found or the found device is
not reachable, contact your network administrator for details about
network settings.
3. If the IP address shown and the method that the XG unit is using to
obtain this address is correct, stop here and exit/close this window.
Otherwise, continue to step 4.
4. Expand the Local Area Connection tree; if necessary, expand further
until the IP address of the XG unit is displayed. Then left click the IP
address; the screen should display as shown in Figure 2-16.
Figure 2-15
Searching for Power Supply IP Address
Summary of Contents for GRIB and Ethernet interface
