Xantrex Freedom X 1200 120VAC, Owner'S Manual

Page: 56 / 78

42 Freedom X Owner’s Guide
Freedom X Inverter Configuration
To change the Low Battery Cutout (LBCO) voltage:
By default the operational mode is set to 10.5V (“  ||  ”).
1. Press and hold the button for three seconds.
2. Press the Scroll button until the left LCD Screen flashes
“  ||” intermittently.
3. Press the button to select the setting.
The right LCD Screen will display the current setting “||  ”
and then begin to flash intermittently.
 to

This range is from 10.5 to 12.1 volts with
increments of 0.1.
4. Continue pressing the Scroll button to cycle through the
settings until you reach the desired setting.
5. Press the button to make the setting permanent.

or

Press the button to exit.
To change the LBCO Shutdown delay timer:
By default the operational mode is set to 300 seconds (“  ||  ”).
1. Press and hold the button for three seconds.
2. Press the Scroll button until the left LCD Screen flashes
“  ||” intermittently.
3. Press the button to select the setting.
The right LCD Screen will display the current setting “||  ”
and then begin to flash intermittently.
 to

This range is from 1 to 300 seconds with
increments of 1 (from 1 to 20) then
increments of 10 (from 20 to 300).
4. Continue pressing the Scroll button to cycle through the
settings until you reach the desired setting.
5. Press the button to make the setting permanent.

or

Press the button to exit.
Freedom X Owners Guide.book Page 42 Wednesday, May 11, 2016 10:32 AM