![background image](http://html1.mh-extra.com/html/xantrex/freedom-sw-230v/freedom-sw-230v_installation-manual_3209513024.webp)
10
Freedom SW 230V Installation Guide
Planning Preparations
AC Components
NOTE
: Unless otherwise referenced specifically by product
name, the components refer to all models of Freedom SW
inverter/chargers.
AC Input
AC input can be supplied from a single-phase 230-volt 50-Hz
AC source such as the utility grid (power company), a
generator, or the output of a transfer switch.
AC Output
The output voltage on Freedom SW inverter/chargers is
230 volts AC. The Freedom SW 2524-230 and Freedom SW
3524-230 models have a Single Input and Single Output line
(SI-SO) configuration.
AC Loads
The Freedom SW 230V is intended to power loads consisting
of 230 volts/50 Hz AC appliances.
In Invert mode, the Freedom SW 230V provides 230 volts/
50 Hz AC to loads connected to Line out. In AC Bypass
mode, the source connected to the AC input is passed through
to the load. Only 230 volts/50 Hz AC appliances can be
connected to the Freedom SW 230V output.
AC Disconnect and Over-Current Protection
Device
To meet mobile electrical code requirements, and to protect
system wiring, the AC inputs and outputs of the inverter/
charger must be provided with overcurrent protection on both
the AC input and output. This protection may be a circuit
breaker or a fuse with a disconnect device (for simplicity the
following refers to breakers). Refer to your applicable
installation codes and the following requirements:
FSW 230V Installation Guide.book Page 10 Tuesday, August 7, 2018 9:18 AM