background image

Installation  . . . . . . . . . . . . . . . . . .3
Operation . . . . . . . . . . . . . . . . . . .6
Cable Specifications  . . . . . . . . . .10
Technical Specifications  . . . . . . .12
Troubleshooting  . . . . . . . . . . . . .13
Contact Us  . . . . . . . . . . . . . . . . .14
Compliance Information . . . . . . .15

* Typical maximum cable distance.

Actual distance is dependent upon the
physical characteristics of the network
installation.

Trademark Notice

All trademarks and registered trademarks are the property of their respective owners.

Copyright Restrictions

© 2002 - 2005 Transition Networks.
All rights reserved.  No part of this work may be reproduced or used in any form or by any
means - graphic, electronic, or mechanical - without written permission from Transition
Networks.
Printed in the U.S.A.

33234.J

Part Number

Port One - Copper
100Base-TX

Port Two - Duplex Fiber-Optic
100Base-FX

CFETF1011-205

RJ-45
100 m 

(328 ft)*

ST, 1300 nm multimode
2 km

(1.2 miles)*

CFETF1013-205

RJ-45
100 m

(328 ft)*

SC, 1300 nm multimode
2 km 

(1.2 miles)*

CFETF1014-205

RJ-45
100 m 

(328 ft)*

SC, 1310 nm single mode
20 km 

(12.4 miles)*

CFETF1015-205

RJ-45
100 m

(328 ft)*

SC, 1310 nm single mode
40 km

(24.9 miles)*

CFETF1016-205

RJ-45
100 m

(328 ft)*

SC, 1310 nm single mode
60 km (

32.3 miles)*

CFETF1017-205

RJ-45
100 m

(328 ft)*

SC, 1550 nm single mode
80 km 

(49.7 miles)*

CFETF1018-205

RJ-45
100 m 

(328 ft)*

MT-RJ, 1300 nm multimode
2 km 

(1.2 miles)*  

CFETF1019-205

RJ-45
100 m 

(328 ft)*

LC, 1310 nm single mode
20 km

(12.4 miles)*  

CFETF1039-205 

RJ-45
100 m 

(328 ft)*

LC, 1300 nm multimode, 2 km 

(1.2

miles)*

User’s Guide

CFETF10xx-205

Slide-in-Module Media Converter

Fast Ethernet

Copper to Fiber

100Base-TX to 100Base-FX

Transition Networks CFETF10xx-205 series Fast
Ethernet 100Base-TX to 100Base-FX media
converters connect 100Base-TX twisted-pair copper
cable to multimode or single mode 100Base-FX
fiber-optic cable. The CFETF10xx-205 is also
designed to be installed in a 

PointSystem™

chassis.

The CFETF1029-2xx model is the single mode, single fiber version of the media
converter.  For more information, see the CFETF1029-2xx user’s guide #33244  at:
www.transition.com. 

Summary of Contents for CFETF1011-205









Reviews: