Xantrex Freedom EX 4000 Page 46 Owner'S Manual Download

Page: 46 / 82

Freedom EX 4000 Remote Display Panel

Freedom EX 4000 Owner's Guide

Icon

Definition

The load icon is displayed if there is
voltage available at the AC output.

The bar represents load consumption
levels. 100% is an indication of full
capacity and 25% indicates low
consumption. All the bars disappear at
< 20 watts, and AC load indicates zero
watt power.

Shows up in grid mode when AC shore
power is present. If the power is being
qualified, then this icon will flash.

Shows that the unit is in grid mode and is
bypassing shore power directly to the
loads.

Shows up in shore mode when AC shore
power is present. If the power is being
qualified, then this icon will flash.

Shows that the unit is in shore mode and
is bypassing shore power directly to the
loads.

Icon

Definition

This icon shows when there is power
conversion from AC to DC - charging.

This icon shows when there is power
conversion from DC to AC - inverting.

The alarm buzzer is muted.

Summary of Contents for Freedom EX 4000



















































































Search results

Summary of Contents for Freedom EX 4000

Reviews:

Related manuals for Freedom EX 4000

Brands by name

Popular brands

Xantrex Freedom EX 4000, Owner'S Manual

Search results

Summary of Contents for Freedom EX 4000

Reviews:

Related manuals for Freedom EX 4000

Brands by name

Popular brands