Environmental Specifications
975-0999-01-01
61
Freedom EX 4000
Shore to inverter:
Inverter to shore:
Shore voltage greater
than 125V(min) - 138V
(default) - 144V(max)
Shore voltage less than
above value – 2V
hysteresis
Waveform
True Sine Wave
Peak Efficiency
95.5 %
Idle consumption
(DC-DC converter has no load. Remote
display, RV-C control, and BTS are
connected.)
< 0.3 W
(Power button on
unit is Off (Standby))
< 8 W
(Power button on unit is
On, inverter mode disabled,
charger mode enabled)
< 30 W
(Power button on unit
is On, inverter and charger
mode enabled)
Cooling
Fan, activated by any of
the following:
n
High internal
temperature
n
High AC output
power
Freedom EX 4000
Nominal voltage
48 VDC
Operating voltage
40–64 VDC
Maximum current at full load
130 ADC
Table 11 DC input for inverting
Freedom EX 4000
Nominal voltage
48 VDC
Maximum voltage
64 VDC
Maximum charge rate
80 A single unit
160 A when parallel or
series stacked
b
Power factor corrected charging
PF (0.98)
Table 12 DC output for charging
b
Contact Xantrex prior to stacking two Freedom EX 4000 units together. Stacking configuration via USB is
a required step to enable stacking.
