XT-HDBT-MX44-4K-KIT
USER MANUAL
www.xantech.com
®
Understanding the HDBaseT status lights
Xantech HDBaseT solutions include LED indicators to show connectivity and help diagnose possible problems.
Xantech XT-HDBT-MX44-4K
• The Yellow HDBaseT status link light will be off when the zone output has been turned off or there is a problem with the specific Matrix output.
• The Yellow HDBaseT status link light will blink when the zone output is on and working.
• The Green HDBaseT link light will blink if there is an unstable connection between the Matrix and HDBaseT Receiver.
• The Green HDBaseT link light will be lit when a there is an active HDBaseT Receiver connected to the Matrix.
• The Green HDBaseT link light will be off when a there is no connection with a HDBaseT receiver.
Xantech XT-HDBT-EX70-4K-RX
• The HDMI link light will be off when there is no connection with a display.
• The HDMI link light will be on when there is an active connection with a display.
• The HDBaseT link light will be off when there is no CAT cable/active HDBaseT connection on the RJ45 HDBaseT input.
• The HDBaseT link light will blink if there is an unstable connection between the Matrix and HDBaseT receiver.
Terminating HDBaseT CAT cable
It is important that the interconnecting CAT cable between the ELAN HDBaseT products is terminated using the correct RJ45 pin configuration. The
link CAT cable MUST be a ‘straight’ (pin-to-pin) CAT cable and it is advised that this is wired to the T568B wiring standard as this format is less
prone to EMI (Electro-Magnetic Interference).
When installing CAT cables it is advised that you use the best possible CAT cable quality possible. HDMI distribution products will only work if used
with CAT5e standard cable or above. ELAN recommends using a CAT6 cable for your installations, especially when running over longer distances,
in areas of high EMI, or with 4K signal distribution. It is advised that using any method of patch panel, wall plate or join in the CAT cable is avoided
as these will result in HDBaseT signal degradation. ELAN also recommend using the best quality RJ45 connectors possible.
RJ45 Pin-Out
T568B
1 2 3 4 5 6 7 8
