XT-HDBT-MX44-4K-KIT
USER MANUAL
10019309 REV-A0
®
© 2018 XANTECH
®
is a registered trademark of Nortek Security & Control.
5V 1A
Input 3
Input 2
Input 1
Input 4
Output
Audio Out
Coaxial
RS-232
L/R IR Ext.
EDID
3 2 1 0
0
1
XT-SW41-4K18G
HDMI 4K 18Gbps 4x1 Switch
Output
Select
Input 1
Input 2 Input 3
Input 4
IR
EDID (Extended Display Identification Data) is a data structure that is used between a display and a source. This data is used by the source to find
out what audio and video resolutions are supported by the display then from this information the source will discover what the best audio and video
resolutions need to be outputted.
While the objective of EDID is to make connecting a digital display to a source a simple plug and play procedure issues do arise when multiple
displays or video matrix switching is introduced because of the increased number of variables.
By pre-determining the video resolution and audio format of the source and display device you can reduce the time need for EDID hand shaking
thus making switching quicker and more reliable.
Configuration of Matrix EDID settings can be achieved in one of the following ways:-
1
Using the EDID dip-switches located on the rear of the Matrix
2
Using the Supplied Matrix IR Remote Control
3
Using the web browser interface
Adjusting The EDID Settings
[DIP]=0000:
HDMI 1080p@60Hz, Audio 2ch PCM
[DIP]=0001:
HDMI 1080p@60Hz, Audio 5.1ch PCM/DTS/DOLBY
[DIP]=0010:
HDMI 1080p@60Hz, Audio 7.1ch PCM/DTS/DOLBY/HD
[DIP]=0011:
HDMI 1080i@60Hz, Audio 2ch PCM
[DIP]=0100:
HDMI 1080i@60Hz, Audio 5.1ch PCM/DTS/DOLBY
[DIP]=0101:
HDMI 1080i@60Hz, Audio 7.1ch PCM/DTS/DOLBY/HD
[DIP]=0110:
HDMI 4K@60Hz 4:2:0+4K@30Hz 4:4:4, Audio 2ch PCM
[DIP]=0111:
HDMI 4K@60Hz 4:2:0+4K@30Hz 4:4:4, Audio 5.1ch PCM/DTS/DOLBY
[DIP]=1000:
HDMI 4K@60Hz 4:2:0+4K@30Hz 4:4:4, Audio 7.1ch PCM/DTS/DOLBY/HD
[DIP]=1001:
HDMI 4K@30Hz 4:4:4, Audio 2ch PCM
[DIP]=1010:
HDMI 4K@30Hz 4:4:4, Audio 5.1ch PCM/DTS/DOLBY
[DIP]=1011:
HDMI 4K@30Hz 4:4:4, Audio 7.1ch PCM/DTS/DOLBY/HD
[DIP]=1100:
DVI 1280x1024@60Hz, Audio None
[DIP]=1101:
DVI 1920x1080@60Hz, Audio None
[DIP]=1110:
DVI 1920x1200@60Hz, Audio None
[DIP]=1111:
Software Control EDID
EDID Dip-switches
Dip-switch position ‘0’ = Off
Dip-switch position ‘1’ = On
Remote Control Description
OUTPUT AND INPUT SELECTION
A
Selects the zone OUTPUT (1 - 4) you wish to
change the source on
B
Selects the source INPUT (1 - 4) you wish to
change on the selected zone
EXAMPLE:
To switch source 2 to zone 4 you would
press Ouput 4 (A) followed by pressing Input 2 (B).
ALL button:
The all button selects all the inputs or
outputs in its corresponding box. Example: (The “All”
button in the Output box selects all the zones so all
zones will change to what source input is selected next)
PTP:
This button will align all zone outputs with the like
numbered source inputs. Example: Input 1 to output 1,
input 2 to output 2, etc
NOTE:
BUTTON PRESS SEQUENCE MUST BE
FINISHED IN 5 SECONDS, OTHERWISE THE
OPERATION IS DISCARDED
EDID SET UP
The matrix provides a comprehensive range of EDID
settings. Below are three examples of how to deploy the
desired EDID setting when using the supplied remote.
A.
Fix EDID to an Input or ALL inputs:
Press the
desired video resolution button (1080I / 1080P / 3D
/ 4K), then select the desired audio format (2.0CH
/ 5.1CH / 7.1CH), then select the source input you
want this EDID information allocated to by pressing
the INPUT 1 – 4 or the ALL button
B.
Copy EDID of Output-X to an Input or ALL:
Press
the COPY button then select the OUTPUT you wish
to copy the EDID information from, then select
the source input you want to copy this EDID to by
selecting the INPUT 1-4 or the ALL button.
C.
User defined EDID to an Input or ALL inputs:
Press USER1 / USER2 button then select the
source you wish to assign this EDID to by selecting
INPUT 1-4 or the ALL button
POWER
OUTPUT
INPUT
1
2
3
4
1
2
3
4
1080I
2.0CH
USER 1 USER 2
FN1
FN2
EDID
5.1CH 7.1CH
COPY
1080P
3D
4K
ALL
PTP
ALL
B
A
C
