3
INSTALLATION
QUICK-START
A typical system will use an IR receiver, several emitters, and a power supply all
connected to a connecting block.
1. Connect the IR receiver to the “IR RCVR” port on the connecting block.
The ‘red’ connector is installed to the ‘red’ plug. Note: In some extended
distances, additional 3-conductor may be required and can be connected to
the terminals on the connecting block.
2. Connect the Emitters to the connecting block. The ‘yellow’ connector is
installed to the ‘yellow’ plug.
3. Connect the power supply to the connecting block.
DL Series
IR Receiver
Red (or white)
Stripe
To 120 V AC
(unswitched)
781ERGPS
789-44
Connecting Block
REMOTE ROOM
MAIN ROOM
Hand Hel d
Remote
3-Terminal Block (not included)
3-Conductor
Inter-room Cable
(unshielded OK)
7' Ribbon Cable
A/V Receiver
DVD
IR Photodiode
Red
Talkback LED
Satellite Receiver
283D Emitter
12VD
C
+12 VDC
GND
STATUS
IR IN
EMITTERS
IR
RCVR
789-44
CONNECTING BLOCK
®
IR OUT
+12V
GND
283D Emitter
283D Emitter
PS12-0.5
12VD
C
+12 VDC
GND
STATUS
IR IN
EMITTER
S
789-44
CONNECTING BLOCK
®
IR
RCV
R
Satellite Receiver
283D Emitter
283D Emitter
286D
Emitter
Blu-ray
A/V Receiver
Smart TV Box
12VD
C
+12 VDC
GND
STATUS
IR IN
EMITTER
S
789-44
CONNECTING BLOCK
®
IR
RCV
R
Satellite Receiver
283D Emitter
283D Emitter
286D
Emitter
Blu-ray
A/V Receiver
Smart TV Box
12VD
C
+12 VDC
GND
STATUS
IR IN
EMITTER
S
789-44
CONNECTING BLOCK
®
IR
RCV
R
DL Series
IR Receiver
DL Series
IR Receiver
DL Series
IR Receiver
Remote Room
Main Room
789-44
Connecting Block
Satellite Receiver
3-Conductor
Inter-room Cable
(Unshielded OK)
283D Emitter
PS12-0.5
283D Emitter
286D
Emitter
Blu-ray
A/V Receiver
Smart TV Box