2
DESCRIPTION
These small IR receivers have been designed for mounting in very small spaces.
They may be mounted under shelf edges, cabinet ledges, in wall speakers, etc. –
anywhere an inconspicuous appearance is desired. The high sensitivity of these
receivers allows placement behind speaker grilles and still receive IR commands
up to 80 feet away*.
FEATURES
•
Wire channel for clean installation.
•
System testing red-talk-back LED.
•
Includes 789-44 connecting block, power supply, two 283D, and two 286D
emitters for easy system installation.
•
BOT-1.0 Break Out Terminator
SPECIFICATIONS
•
Infrared carrier frequency bandwidth: 25 - 60 kHz.
•
Reception range: Up to 80 feet.*
•
Reception angle: +/- 60 degrees.
•
Cable requirements: See “INSTALLATION” below.
•
Max. Transmission length: 1 mile using 18 gauge wire.
•
Maximum current output: 100mA.
•
Drives IR emitters through Xantech Connecting Blocks, Controllers, etc.
•
Dimensions: 2.55” x 0.55” x 0.35” (65mm x 14mm x 9mm).
•
Power requirements: +12VDC, 10mA.
*Depending on remote control output strength and ambient conditions.
MOUNTING
The IR receiver can be mounted to any flat surface, using the two-sided adhesive
tape supplied.
An additional feature is a wire channel on the rear of the surface mount IR
receiver. This will give the installer the ability to provide clean wire dressing in
any direction.