RS2321X8 Serial Router
Page 9
Figure 7: Selecting RC68+ Palette
A
PPLICATION
E
XAMPLE
1: U
SE WITH
X
ANTECH
M
ODEL
IRS232A
AND
S
MART
P
AD
3
PM110 IR K
EYPAD
.
1. Configure the RS2321X8 Router for Stand-Alone Operation as outlined above.
2. Connect all units as shown in
Figure 8
below.
3. Program the IRS232A’s 36 Trigger banks for the proper RS232 Commands desired for up to 8 Different devices
(i.e. Triggers 1 thru 4 for a Projectors Input commands and Power ON/OFF; Triggers 5 thru 8 for an RS232
Controlled Thermostats Temperature UP/Down and HEAT/AC; Trigger Commands 9 thru 16 for a Music Servers
PLAY, STOP, PAUSE, NEXT SONG, PREV SONG, FF, REW, etc…)
4. Program the PM110 Source Buttons with the RS2321X8 Router RC68+ Commands.
a. In Dragon Drop-IR Software click on the PALETTE Menu and click on Select RC68+ Command Palette
from the drop-down menu (or simply press F5 on your keyboard). You should now see the Virtual RC68+
Command screen.
b. Select the OPTIONS tab as shown on the Virtual RC68+ Command screen.
c. Under XANTECH MODEL, make sure it is selected to either RT16-10 or RT8 (RT16-10 should be chosen
by default).
a. Change the CODE GROUP to
90
as shown in
Figure 8
below. (Overlay should be selected to
C
)
5. Program the PM110 Function Buttons with the IRS232A RC68+ Trigger Commands
Note:
Please refer to the Xantech IRS232A and PM110 Operational Manuals for full programming explanation for
each of these devices.
© 2005 Xantech Corporation