15
SETUP
button
X
button
4. MRKP1E Main Setup Menu
To access the Main Setup Menu,
1. Press and hold down the “X” key for at least 3 seconds.
2. Once the Main Setup Menu is displayed on the screen, use the
“SOURCE <” and “SOURCE >” buttons to highlight the category to be
changed.
3. Press the “X” button to choose the category.
4. Use the “SOURCE <” and “SOURCE >” buttons to highlight the
parameter to be changed.
5. Use the “VOLUME UP” and “VOLUME DN” buttons to change the
parameters. (For further details see diagram on Figure 4.1)
The Main Setup Menu consists of the following categories:
KP INFO - displays information about the unit (Model number, Keypad
Address, and Version number)
USER SETUP – allows adjustments of BALANCE, BASS, TREBLE, and
BACKLIGHT Color.
INST SETUP – Allows installer to configure the unit for initial setup and
other options. NOTE: The INST SETUP category can only be accessed
by pressing the hidden “SETUP” button and the “X” button at the same
time. A Q-tip with cotton tip removed, or similar, is recommended for use
when pressing this hidden switch (see Figure 4.0 below)
EXIT – Leave the Main Setup Menu and go back to normal display mode.
Figure 4.0: Trim plate
removed showing hidden
SETUP Button location
8
MRKP1E – FRONT PANEL
Figure 2.2: Front of MRKP1E Keypad
ITEM
DESCRIPTION
1
Display
2
SOURCE Selection
3
VOLUME Adjustment
4
MUTE Button
5
Infrared (IR) ‘Sensor
6
(X) Menu Button
7
POWER Button
8
VOLUME BAR Indicator
8
7
6
2
3
5
4
1
