19
5. Troubleshooting
Symptom
Possible Cause
Solution
MRKP1E does not
power up
1. RJ-45 plug crimped
incorrectly; or wiring
pin-out of RJ-45
reversed.
Verify wiring pin-out and
RJ-45 crimp. Correct by
re-crimping RJ-45 to
CAT-5 cable.
2. Break in CAT-5
between Zone and
“Head-End”.
Check RJ-45 to RJ-45
connections with cable
tester or voltmeter.
No control or IR
sources
1. Wiring: Incorrect
wiring between
MRKP1E and
MRC88m.
Verify and correct
wiring.
2. IR emitter defective
at source.
Replace IR emitter.
Intermittent IR source
control
IR flooding
Check to see if ambient
light is shining on built in
IR receiver or in direct
line with plasma TV
noise. If the IR emitter is
flashing when IR is not
being sent, IR flooding
is likely cause. Disable
the built-in IR Receiver.
Consider use of an
external IR Receiver
(see Fig 2.2 and 3.2).
4
1.0 Introduction
Exceptional Performance
The Xantech MRKP1E is a zone controller specifically designed for the
MRC88m or MRAUDIO8x8m systems. It provides Source Selection, Volume,
Mute and Power control as well as control of all connected sources with its
built-in IR receiver. (NOTE: MRC88m/MRAUDIO8X8m must have Firmware
ver. 2.03 or later to work with the MRKP1E)
About the MRC88m System
The Xantech MRC88m System is the next generation in Whole-house
Audio/Video Entertainment family of products. This is a revolutionary whole-
house audio/video entertainment distribution, audio amplification and control
system. The MRC88m System consists of the MRC88m Controller/Amplifier,
eight Keypads, or Touch Panels, and eight IR Emitters. When combined with
almost any eight IR (or RS232) controlled audio/video source components (CD,
DVD, VCR, Satellite, etc.), using the MRC88m System is as easy as pressing a
button.
MRKP1E Features
•
Fits in recommended EU and UK one gang electrical back boxes.
•
Displays three lines of Meta-data
•
Simple, Easy to Read OLED Display.
•
Includes Screw-less Wall Plates for EU and UK standards.
•
Quick Plug and Play Installation – No PC Software Programming
Required.
•
Hot Swappable – no need to shut down and reset system when upon
connection of keypad
•
Programmable with Universal Dragon™
•
Supports Xantech QuickConfig™
•
Built-In IR Receiver for System and Source Control
•
Built-in connecting blocks for use with optional Xantech external IR
receiver and IR emitters.
MRKP1E Accessories
•
KCK1E Keypad Color Kit (contains, EU and UK bezels and trim plates
in almond, ivory, and black)
