background image

 

Safety Information 

 

Read Information — All the safety and operating information should be read before the 
appliance is operated. 
 
Follow Information
 — All operating and use information should be followed. 
 
Retain Information
 — The safety and operating information should be retained for 
future reference. 
 
Heed Warnings
 — All warnings on the appliance and in the operating instructions 
should be heeded. 
 
Wall Mounting
 — Mounting of this appliance should be done only by an authorized 
installer. 
 
Non-Use Periods
 — Appliances that are left unattended and unused for long periods of 
time should be de-energized. 
 
Water
 — Do not use the apparatus near water. 
 
Cleaning
 — Unplug the apparatus from the power outlet before cleaning. Use only a dry 
cloth to clean the apparatus. 
 
Object and Liquid Entry
 — Never insert objects of any kind through the openings of 
these appliances, as they may touch dangerous voltage points or short-circuit parts that 
could result in a fire or electric shock. Care should be taken so that objects do not fall 
and liquids are not spilled into the appliance through openings in the enclosure. 
 
Servicing
 — Do not attempt to service these appliances yourself, as opening or 
removing covers may expose you to dangerous voltage or other hazards. Refer all 
servicing to qualified service personnel. 
 
Damage Requiring Service
 — These appliances should be serviced by qualified 
service personnel when: 

  A power supply connection or a plug has been damaged or 

  If liquid has been spilled into the appliance or objects have fallen into the appliance 

or 

  The appliance has been exposed to water or moisture or 

  The appliance does not appear to operate normally or exhibits a marked change in 

performance or 

  The appliance has been dropped or the enclosure damaged. 

 
Replacement Parts
 — When replacement parts are required, be sure the service 
technician has used replacement parts specified by the manufacturer or that have the 
same characteristics as the original part. Unauthorized substitutions may result in fire, 
electric shock, or other hazards. The Master Control Unit battery should be replaced 
only after turning the power off and only by an authorized installer. 
 

 

22 

Xantech Limited Warranty 

 
Xantech Corporation (“Xantech”) warrants this product to be free defects in 
materials and workmanship for a period of two years from the date of 
documented purchase by the original consumer. Any products returned to 
Xantech and found to be defective by Xantech within the warranty period will be 
repaired or replaced, at Xantech’s option, at no charge.  Xantech will not be 
responsible for the actual coast of the installation or removal of the product, nor 
for any incidental or consequential damages.  Some states do not allow the 
exclusion or limitation of incidental or consequential damages, so the above 
limitation may not apply to you.  This warranty gives you specific legal rights.  
You may have additional legal rights that vary from state to state. 
 
 

 
 
 
 
 
 
 
 
 
 

Xantech and Universal Dragon™ are trademarks of Xantech Corporation 

Legrand® is a registered trademark of the Legrand Group. 

All other trademarks are the properties of their registered owners.

 

 
 
 
 
 

Xantech Corporation 

13100 Telfair Avenue, Sylmar CA 91342 | Xantech.com 

Installation Instructions, MRKP1E © 2009 Xantech Corporation 

 

Document #08905249C 

 

This document is copyright protected. No part of this manual may be copied or 

reproduced in any form without prior written consent from Xantech Corporation. Xantech 

Corporation shall not be liable for operational, technical, or editorial errors/omissions 

made in this document. 

Summary of Contents for MRKP1E













Reviews: