16
USER SETUP PARAMETERS
BALANCE
Adjust audio output level on the right or left channel. The settings can be adjusted from
“-31” to “0” (middle) to “+31”
TREBLE
Adjust the higher frequency range of audio output. The settings can be adjusted from “-
14” to “0” (middle) to “+14”
BASS
Adjust the lower frequency range of audio output. The settings can be adjusted from “-
14” to “0” (middle) to “+14”
BL COLOR
Gives option to change the Text color and keypad backlighting to Blue or Green.
GO HOME (Return to Main Setup Menu)
After configuring the above parameters, user can choose to SAVE, NO SAVE, or
RESTORE the settings above.
INST SETUP PARAMETERS
QUICK CONFIG
Launches Xantech Quick Config. Function. Press
“
X
”
to start process. Refer to the
Dragon Quick Config manual for details on setting up Quick Config.
KP ADDR (Keypad address)
Assigns a different keypad address for each keypad when using multiple keypads in one
zone
.
OLED BRIGHT (Display Brightness)
Adjust the display brightness to DIM, MEDIUM, or BRIGHT.
LED BRIGHT (Button and Volume LED Brightness)
Adjust the button backlight brightness to DIM, MEDIUM, or BRIGHT.
BL TMR VAL (Backlight Timer Value)
Adjust the time when the backlight will turn off for energy savings when there is no
activity. Setting are “ON” (always on), “30 SEC (turns off after 30 sec), and “1 MIN”
(turns off after 1 minute). This feature is highly recommended on non-typical setups
where the display will be constantly on with a still (non-changing) image on the display.
In these rare cases, activating this feature will prevent image “burn in”.
GO HOME (Return to Main Setup Menu)
After configuring the above parameters, user can choose to “SAVE”, “NO SAVE”, or
“RESTORE” the settings above.
17
Fig. 4.1 Main Setup Menu Diagram (continued on next page)
(
MRC88m/MRAUDIO8X8m require Firmware Ver. 2.03 or later to work with
the MRKP1)
continued on
the next page