background image

 

 

 

08905107C 

 

  - 

OPERATION 
 
A. Visitors 

When a visitor presses the call button (comes off-hook) on the entry phone, the 

DCH4 

will begin 

ringing the house phones and “Caller ID” information is sent. If a house phone is on a C.O. call, call 
waiting tones and “Call Waiting Caller ID” information is sent. A Touch Tone “

#

” from the house phone 

will put the C.O. call on hold and connect the house phone to the entry phone (beeps will be heard, 
indicating which entry phone you are connected to). Enter Touch Tones “**” to momentarily activate 
that entry phone doorstrike and return to the C.O. call or enter “

#

” to just return to the C.O. call 

without activating the doorstrike. If the doorstrike is activated, a buzz sound will be heard confirming 
the strike has been activated. If you require the door strike to remain on continuously (ie: a truck 
delivery), enter Touch Tones “*

1

” to continuously activate that relay and return to the C.O. call. A 5 

second buzz sound will indicate the door strike relay is latched on. When the visitor calls in again (ie: 
they are finished unloading the truck),  enter Touch Tones “*

0

” to deactivate the relay. Alternatively, 

the doorstrike relay can be de-activated by going off-hook with any house phone and entering 

#1*0 

for doorstrike relay 1, 

#2*0 

for doorstrike relay 2, etc. See 

Operation 

section 

C

. A short buzz will 

indicate the door strike relay is off. 
 

Entry Phone

 

Caller ID and Call Waiting ID

 

1

 

“Entry Phone 1”

 

2

 

“Entry Phone 2”

 

3

 

“Entry Phone 3”

 

4

 

“Entry Phone 4”

 

 

 
B. Monitoring

 

Tenants may dial out to an entry phone that supports auto-answering capability by dialing “

#1

”, “

#2

”, 

#3

” or “

#4

” to call entry phones 1-4 respectively.  

 
C. Activating Doorstrike/Gate 

You may activate the doorstrike relay without calling out to the entry phone. Refer to the chart at the 
right for dialing strings. When you momentarily activate a doorstrike relay, it will activate for the 
amount of time specified in 

Programming

, section 

F

* Note: The latch command can be disabled 

(see Programming section B). 

 

Entry Relay

 

Momentarily 

Activate 

Doorstrike

 

* Latch 

Doorstrike

 

Un-Latch 

Doorstrike

 

 

Toggle 

Doorstrike Relay

 

 

#1**

  

#1*1 

 

#1*0 

 

#1*# 

 

 

#2**

  

#2*1 

 

#2*0 

 

#2*# 

 

 

#3**

  

#3*1 

 

#3*0 

 

#3*# 

 

 

#4**

  

#4*1 

 

#4*0 

 

#4*# 

 

 

Summary of Contents for DCH4











Reviews: