![background image](http://html1.mh-extra.com/html/xantech/dch4/dch4_installation-instructions-manual_3174439004.webp)
08905107C
-
4
-
B. Quick Programming Features
Enter Digits
- then -
Memory
Location
Privacy Number (factory disabled)
0-6 digits (0-9)
+
#00
Entry phone 1 keyless entry codes (factory disabled)
4-6 digits (0-9)
+
#11 - #16
* Entry phone 1 one time use keyless entry codes (factory disabled)
4-6 digits (0-9)
+
*#11 - *#16
Entry phone 2 keyless entry codes (factory disabled)
4-6 digits (0-9)
+
#21 - #26
* Entry phone 2 one time use keyless entry codes (factory disabled)
4-6 digits (0-9)
+
*#21 - *#26
Entry phone 3 keyless entry codes (factory disabled)
4-6 digits (0-9)
+
#31 - #36
* Entry phone 3 one time use keyless entry codes (factory disabled)
4-6 digits (0-9)
+
*#31 - *#36
Entry phone 4 keyless entry codes (factory disabled)
4-6 digits (0-9)
+
#41 - #46
* Entry phone 4 one time use keyless entry codes (factory disabled)
4-6 digits (0-9)
+
*#41 - *#46
Master keyless entry codes (factory disabled)
4-6 digits (0-9)
+
#51 - #56
* Master one time use keyless entry codes (factory disabled)
4-6 digits (0-9)
+
*#51 - *#56
Doorstrike 1 activation time (.5 - 99 secs, factory set to 00 = .5 secs)
2 digits (00-99)
+
#19
Doorstrike 2 activation time (.5 - 99 secs, factory set to 00 = .5 secs)
2 digits (00-99)
+
#29
Doorstrike 3 activation time (.5 - 99 secs, factory set to 00 = .5 secs)
2 digits (00-99)
+
#39
Doorstrike 4 activation time (.5 - 99 secs, factory set to 00 = .5 secs)
2 digits (00-99)
+
#49
** Auxiliary Contacts:
Auxiliary contact timing (.5 - 99 secs, factory set to 00 = .5 secs, DIP
switch 1 off)
2 digits (00-99)
+
#59
1. Entry phone triggered timed activation (factory setting, DIP switch 1
off)
1 +
#60
2. Entry phone triggered continuous activation
2
+
#60
3. Entry phone triggered ring cadence activation
3
+
#60
4. Auxiliary input triggered timed activation
4
+
#60
Maximum entry phone ring count (1 - 99 rings, factory set to 5 rings)
2 digits (01-99)
+
#61
Enable entry phone ringing (factory setting)
1
+
#62
*** Disable entry phone ringing
0
+
#62
Security code (factory set 845464)
6 digits (0-9)
+
#47
Enable entry phone Caller ID (factory setting)
*1
Disable entry phone Caller ID
*2
Entry phone calls give custom double ring cadence (factory setting)
*3
Entry phone calls give standard ring cadence
*4
Dial “9” to access an outside line
*5
Instant outside line access (factory setting, for use with private dial
tone)
*6
Enable doorstrike latching commands (factory setting)
*7
Disable doorstrike latching commands
*8
Enable entry phone identifier beeps (factory setting)
*9
Disable entry phone identifier beeps
*0
Reset all programming to factory default settings
###
* Note: A keyless entry code can be programmed for EITHER an unlimited number of uses or one
time use, NOT both. There can be a maximum of 6 keyless entry codes and/or one time use keyless
entry codes per entrance.
** Note: Auxiliary contact programming is only to be used if the DCH4 is in the Auxiliary Contact
Mode (DIP switch 1 OFF), see DIP Switch Programming section D.
*** Note: Only entry phone call waiting Caller ID will function in this mode, standard entry phone
Caller ID will not.