background image

 

 

 

   

 

1.0 Introduction 

Exceptional Performance 

The D5KP is Xantech’s Amplified OLED Controller for the D5SH, D5SH4, D5RH, and D5XH Digital 
Audio Hub. The D5KP is required to control each zone of a DIGI-5 Digital Distribution System. It 
provides Source Selection, Volume, Mute and Power control as well as control of all connected audio 
sources with its built-in IR receiver. Additionally, it provides amplification for the zone’s speakers 
using an on-board 30 watts per channel Digital amplifier.  

About DIGI-5 Technology 

DIGI-5 is a revolutionary new technology standard that provides a complete end-to-end digital audio 
solution over CAT-5 wiring. DIGI-5 is based on advanced digital distribution and amplification circuits 
that allow multi-room audio systems to be installed quickly and cost effectively. 
 
DIGI-5 is a collaboratively developed technology that is licensed by the Linear Home Technology 
Group and is being initially integrated on a Linear group-wide basis, targeted to expand market and 
consumer acceptance of such systems. 

Features 

  Vivid OLED Controller for Xantech’s DIGI-5 Digital Delivery System 

  Built-In Digital Amplifier – 30 Watts per Channel 

  Simple, Easy to Read OLED 

  Includes Screw-less Wall Plate (white) 

  Quick Plug and Play Installation – No PC Software Programming Required 

  Built-In IR Receiver for System and Audio Source Control 

  Companion D5IP Source Input Wall Plate (Sold Separately) Allows for Connection of In-Room 

Audio Sources such as MP3 or Gaming System Players 

D5KP Accessories 

  D5PS Digital Audio Power Supply (required only with D5SH or D5SH4) 

  D5SH 1 Source, 4 Zone Structured Wiring Hub (required distribution hub) 

  D5SH4 4 Source, 4 Zone Structured Wiring Hub (required distribution hub) 

  D5RH 4 Source, 4 Zone Rack Mount Hub (required distribution hub) 

o

  Note: This manual will reference connection to the D5RH only. 

  D5XH 4 Source, 6 Zone Rack Mount Expansion Hub (optional) 

  D5IP Source Input Wall Plate (required) 

  D5MR Slim-line IR Remote 

  D5LR Learning Remote Control 

  D5KCK Keypad Color Kit (contains almond, ivory, and black) 

Summary of Contents for D5KP

























Reviews: