User Manual
1
4
Product Profile
The Smart Battery 2019 is available in two versions: B12620Q (standard for P20) and B12800Q (standard for P30).
Both are compatible with all XAG P-Series Plant Protection UAV Modules. The Smart Battery contains 12 large-
capacity lithium polymer batteries, and is integrated with a BMS module. It enables real-time monitoring of
voltage, current, and temperature, and also features charging protection. During use, the battery can
transmit feedback information to the device in real time. In case of low power or battery failure, the BMS system
will send an emergency stop command to ensure the safety of the device.
Overview
Handle
Control Panel
Clip
Air Outlet
Connector Port
ON: Normal
Flashes slowly: Low
Temperature
Flashes quickly:
High Temperature
Flashes twice:
Battery Malfunction
Battery Level Indicators
Status Indicator
Power Button
Air Inlet
ON/OFF
[1]
Battery ON/OFF
1. When the Battery is turned off, press the Power button once to check the current battery level, indicated
by the Battery level LED. If the battery is too low, recharge before use
2. Connect the battery to an device, then press the Power button once for at least 1 second until all the
indicator lights flashes, then press and hold the power button again for at least 1 second until you hear a
beep from the battery.
3. Repeat Step 2 to turn off the Battery
