X4-TECH MCD-4030, Instruction Manual

Page: 29 / 36

29
Note:
If you wish to be woken by sounds from a CD,
memory card or a USB memory stick, you must
insert the appropriate medium beforehand.
If you wish to be woken by the radio, tune in
to a radio station as described under "Radio
mode".
To be able to carry out the following program-
mings, the device must be in the standby mode.
Programming the mode
1.
Press the button
TIMER
.
The indicator for the mode flashes in the display.
2.
With the button
FUNCTION
select the mode CD ,
USB , CARD or TUNER .
Adjusting the volume.
3.
Press the button
TIMER
.
The volume indicator flashes on the display.
4.
With the buttons and
VOLUME-
select
the desired sound volume.
Setting the switch-on time
5.
Press the button
TIMER
. In the display appears
ON and the hour indicator for the switch-on
time blinks.
6.
To set the hour for the switch-on time, press the
buttons
SKIP
or
SKIP
.
7.
To save the setting, press the button
TIMER
once
again. The minute indicator for the switch-on
time now blinks in the display
8.
To set the minutes, press the buttons
SKIP
or
SKIP
.
Setting the switch-off time
9.
To programme in the hour for the switch-off
time, press the button
TIMER
. In the display
appears OFF and the hour indicator blinks.
10.
To set the hour, press the buttons
SKIP
or
SKIP
.
11.
To save the setting, press the button
TIMER
once
again. The minute indicator for the switch-off
time blinks in the display.
12.
To set the minute, press the buttons
SKIP
or
SKIP
.
Note:
If the switch-off time is the same as the switch-on
time, the indicator ERROR appears in the next
step.
Saving the settings
13.
Press the button
TIMER
.
The time appears in the display again. Additionally,
a clock symbol indicates that the alarm function is
active.
• Should you wish to deactivate the alarm function,
briefly press the button
TIMER
.
• To reactivate the alarm function, press the button
TIMER
once again and carry out the steps descri-
bed above to programme in the alarm function.
Activating the sleep function (Sleep)
You can detemine a time after which the micro-system
will switch itself off. You can select a switch-off time
between 10 and 90 minutes.
1.
Switch the micro-system on.
2.
Press the button
SLEEP
repeatedly until you have
entered in the desired switch-off time.
In the display the switch-off time and SLEEP is in-
dicated.
3.
Each time the button is pressed the switch-off
time is reduced by ten minutes.
To switch the sleep function off, press the button
SLEEP
repeatedly until OFF is indicated in the display.