USER MANUAL
GB
23
Fig. 1
3. Push the connector plug (Fig. 1/1) of the RGB LED Strip into
the connector socket (Fig. 1/3) of the control unit.
NOTICE!
There is a risk of damage if these are not connected properly! The ar-
rows on the two connectors (Fig. 1/2) must be aligned opposite each
other. If this is not the case, there is a risk of the product developing a
fault or terminal damage.
Fig. 2
4. Push the plug (Fig. 2/4) of the mains adapter into the socket
on the control unit (Fig. 2/5).
Summary of Contents for 701350
Page 31: ...31...
Page 32: ...1 2014...
