5. Push the plug on the mains adapter into the mains socket.
6. Remove the tab from the remote control to activate the
battery.
Fig. 2.1
7. Now check the RGB LED strip for proper functioning. Already
processed or cut strips are excluded from reclamation, conver-
sion or redemption! LED-strips are – like all illuminants – consu-
mable articles. In case of correct operation you can proceed with
point 8.
8. Peel off the adhesive film from the back of the RGB LED strip.
9. Immediately fix the RGB LED strip in position.
10. The RGB LED strip can be cut to desired length. The RGB LED strip
can be cut at the marked locations. To do this, cut the tape with
scissors on the copper-colored compound.
Fig. 2.2
Please note that when shortening the RGB LED strip, it is no
longer protected from dust or water at this point. Close it again,
e.g. with neutral silicone, to restore the original protection.
RGB LED Strip
24
Summary of Contents for 701350
Page 31: ...31...
Page 32: ...1 2014...
