Improper handling
WARNING!
There is a risk of injury as a result of improper
handling!
Improper handling of the RGB LED Strip
can lead to injuries.
• Make sure that the unit is switched on and used correctly.
Please note the operating instructions in this respect.
• If you have any doubt about the mode of operation, safety
or connection of the RGB LED Strip, you must contact the
manufacturer or a qualified person.
• Also please note the additional safety advice in the individual
chapters of this operating manual.
• In rare cases, light impulses can cause epileptic phenomena.
If dizziness, muscle twitching and/or loss of perception occurs,
consult a doctor immediately.
• Never look directly into the light because this can cause eye
damages.
Unpacking and checking
Unpack all the components and check that they are complete
and intact (Fig. 4, Page 30) If you find any defects or deficienci-
es, contact your specialist dealer immediately.
Keep the packaging so that you can safely store and pass on
the RGB LED Strip in future. Dispose of unwanted packaging
materials in an environmentally friendly way.
Installation
1. Unroll the RGB LED strip from the spindle. The RGB LED strip
may only be operated in unwound state.
2. Clean the area to which the RGB LED Strip is to be attached.
These areas must be sufficiently even, clean and free from
grease to ensure optimum adhesion of the RGB LED Strip.
RGB LED Strip
22
Summary of Contents for 701350
Page 31: ...31...
Page 32: ...1 2014...
