X2E XORAYA N4000, User Manual

Page: 109 / 192

U
SER
M
ANUAL
X
ORAYA
N4000 | X
ORAYA
N4000+
X
ORAYA
S
UITE
109
5.6 Resetting to factory defaults
For unwanted or defective system or interface configurations, it is
recommended to reset the datalogger back to its factory defaults.

In the Logger menu, click Reset configuration to factory settings to
reset the system configuration or one or all interfaces to their factory
defaults.
or
 Press the default button (D) for at least 3 seconds to reset all
datalogger settings. (
➔
Connections and controls)
The datalogger goes into idle state by way of confirmation.

The configuration is reset.
Updating the firmware
Factory setting are automatically restored whenever
features are added or eliminated upon a firmware update.
(
➔
Firmware-Update)
Therefore, you should check your configuration status
after each firmware update.