X2E Automotive Ethernet Converter, User Manual

Page: 5 / 22

User Manual Automotive Ethernet Converter
5
General safety instructions
The Automotive Ethernet Converter is only intended for use by qualified personnel. Read the
user manual and especially this chapter thoroughly before operating.
CAUTION
Electric shock due to damaged components
Damages to the converter or the connection cable can result in electric
shock.

Check all components regularly for damages.

Only connect the converter if all components are undamaged.
CAUTION
Device damage due to vibrations, dirt or liquids
Excessive vibrations, dirt or liquids may result in malfunction or destruction
of the converter.

Avoid exposing the converter to these influences.

Keep the converter clean, especially plugs and sockets to ensure a
reliable contact.

Never open the converter.
CAUTION
Device damage due to electrostatic discharge
Electronic components can be destroyed by electrostatic discharge.

Avoid touching connectors and connector pins.

Ground yourself before carrying the converter in your hands.

Operate the converter in an ESD-compliant environment.
FCC notice
This equipment has been tested and found to comply with the limits for a Class B digital de-
vice, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equip-
ment does cause harmful interference to radio or television reception, which can be deter-
mined by turning the equipment off and on, the user is encouraged to try to correct the inter-
ference by one or more of the following measures: