X2E Automotive Ethernet Converter, User Manual

Page: 8 / 22

User Manual Automotive Ethernet Converter
8
Connections and controls
The front side contains LEDs, the service interface and the combined connection for power,
100/1000Base-T1 and CAN.
The Ethernet interface and control elements are located on the back side.
Front view Back view
Link LED for 100/1000Base-T1 (A)
Colour Meaning
green link established
(also: USB bootloader mode, depending on version)
Connection for power, 100/1000Base-T1 and CAN (B)
Pin Function
1 CAN_H
2 CAN_L
5 KL30(Ubatt)
6 KL31(GND)
7 OABR_N
8 OABR_P
Service interface (C)
Use the Micro USB interface to change the configuration and to update the firmware. For fur-
ther information, refer to the chapter
Configuration and firmware update .