Page9
PACKAGE CONTENTS
Your X-Treme X-140 comes with the following items in the box. Please locate
all of the following:
1. The X-Treme X-140 Scooter
2. 24V Battery Charger
3. Tool Kit
4. Product Handbook
GETTING STARTED
Please read and understand these instructions and the OPERATING
PROCEDURES section, prior to starting or riding your X-140
Assembly
1. Carefully remove the X-140 from the box.
2. To unfold the X-140, begin by pressing
down on the FOLDING HANDLE with one
hand, while gently pulling up on the
handlebars with the other. The handlebar
will snap into place and will not move when
secured properly.
3. Loosen the handlebar clamp, and raise the
handlebar to the desired height, being sure
the pole snaps into place. Then tighten
clamp securely.
4. To attach the handlebars to each side of the
t-bar, first loosen the top handlebar clamp
then slide each handlebar into the t-bar
being sure they snap into place and are in
the correct orientation for riding. Finish by
clamping down the clamp lever securely.
