Page18
Troubleshooting: How To Check Charger, Battery & Controller
To See If They Are Functioning Properly
Set the Main On/Off switch in the OFF position.
1) Plug Charger into 110 Volt outlet Only: Does the Green light come on solid?
2) With Charger still plugged into the 110 Volt outlet plug into the scooter: Does the Light
stay Green or begin to alternate Green/Red?
Charger Lights:
Solid Green = Charging
Alternating Green/Red = Batteries Charged.
Other things to check with foot board removed:
- Check the back of the Charger Port to confirm wires are firmly attached.
- Check back of the Fuse Holder to confirm wires are firmly attached.
- Confirm the Red & Black wires coming from the Charger Port are plugged into the port
labeled Charger on the Controller.
- Confirm the Black & Black wires coming from the On/Off Switch are plugged into the port
labeled Lock on the Controller.
- Confirm the Red & Black wires coming from the handlebars are plugged into the port
labeled Brake on the Controller.
- Confirm the Red, Black & Green wires coming from the handlebars are plugged into the
port labeled Derailleur on the Controller. This actually is the Throttle input.
To test run the scooter place on a box so that the Rear Wheel is not touching any surface.
- With everything connected correctly turn the Main switch ON.
- Twist Throttle: does the motor and rear wheel run?
* If Yes, then scooter is working properly.
- If No Plug Charger into 110 Volt Outlet and Scooter, with Main switch in the On position
twist Throttle: Does the Scooter run?
* If Yes then the Batteries will need to be checked and possibly replaced.