NOTES
1. The alarm will enter the searching mode or the pairing mode for 60 seconds with the
LED flashing red. After 60 seconds, repeat step 2 to connect the alarms. If needed,
press the test/silence button once while the alarm is in the searching mode or the
pairing mode, and the LED will stop flashing red and the alarm will quit the pairing
mode to enter normal status.
2. Test all wireless alarms to ensure they are interconnected before installation.
3. A maximum of 24 wireless alarms can be interconnected on the same network.
4. The model can only be interconnected with other X-Sense Link
+
wireless interlinked
alarms.
How to Disconnect
Press the test/silence button 4times; the alarmwill beep once. Then, hold down the button
until it beeps once more to disconnect. After disconnecting, it can be reconnected to the
same network, or added to a new network.
NOTE
:
The X-Sense Link
+
wirelessinterlinked alarms in one multi-pack have already
been interconnected. To create a new network, you will first need to disconnect each
alarm individually in this multi-pack to avoid having them all join the same network.
Alarm Mode
X-Sense Link
+
wireless interlinked alarms can be interconnected such that any unit that
senses dangerwill cause all other units in the interconnected network to alarm.
