alarm.
threshold, the alarm
signal will stop. Then,
the alarm goes back to
the standby mode.
Unit detected
CO and
initiated an
alarm.
-
The LED indicator
flashes green once every
second for 5 seconds.
None.
Alarm cancellation:
when the CO
concentration level
drops below the alarm
threshold, the alarm
signal will stop. Then,
the alarm goes back to
the standby mode.
Test
Mode
Test a single
unit.
2 sets of 3 red flashes
followed by2 sets of 4
red flashes.
2 sets of 3
long
beepsfollowed
by 2 sets of 4
quick beeps.
Press the Test/Silence
button.
Test all
interconnected
units.
The LED indicator
flashes red rapidly.
Continuous
beeping until
you release
the
Test/Silence
button.
Initiatingalarm.
Hold down the
Test/Silence button on
one unit in the network.
The LEDflashes red and
green sequentially.
Other interconnected
alarms in the network.
Silence Mode
-
Flashesred3 times every
4 seconds.
None.
Smoke silence mode:
After 9 minutes, the
unit will exit silence
mode.
Flashes red 4 times
every 5.8 seconds.
None.
CO silence mode: After
9 minutes, the unit will
exit silence mode.
Flashes yellow once
every 60 seconds.
None.
Silence mode during
low battery: After 10
hours, the unit will exit
silence mode.
Flashes yellow 3 times
every 60 seconds.
None.
Silence mode during
the end of cycle: After
22 hours, the unit will
