S P 6 0 S E R I E S
S P H E R E S P E C T R O P H O T O M E T E R
3
What to do first…
Unpack and Inspect
•
Remove the instrument from the shipping carton. Be sure
to keep the original carton. If shipment is necessary, the
instrument should be packaged in the original carton.
Contact X-Rite if you need a new shipping carton.
•
Inspect the instrument for any damage. If any damage
occurred during shipment, immediately contact the
transportation company. Do not proceed with installation
until the carrier’s agent has inspected the damage.
•
Check your packaging contents against your packing list
and original order. A detailed packaging drawing and a parts
list can be found in the instrument's Operator's Manual.
Install the Battery Pack
The instrument is shipped from the factory with the battery pack
removed. The battery pack is located in a carrying case
compartment and must be installed before the instrument is used.
1.
Hold the shoe next to the instrument housing and lift
upward on the spring-loaded latch
(refer to Unlatching the
Instrument Shoe)
. Open the shoe perpendicular to the
instrument housing.
2.
Carefully rotate the instrument over and rest it on its top.
3.
Slide the battery pack into the compartment with the
battery connector facing down and to the back of the
instrument.
4.
Press down on the pack until the connector is properly
seated and the tabs click into position.
Battery Connector
Battery Pack
