X-Rite MA94, User Manual, Page: 14 / 53

M U L T I - A N G L E S P E C T R O P H O T O M E T E R
12
Attaching the Safety Strap
A safety strap is included with your instrument. The strap attaches to the back of the instrument
and around your wrist. The strap should not be used to carry the instrument.
1.
Feed the small looped end of the strap around the strap pin at the back of the instrument.
2.
Insert the wrist strap end through the small loop.
3.
Pull on the wrist strap to secure to the strap pin.
4.
Use the slide to tighten the strap around your wrist.
Attaching the Dust Cover
The dust cover protects the measurement port and internal optics components. Make sure the
instrument is always stored with the cover installed.
1.
Position the cover in either direction below the measurement port.
2.
Snap the dust cover into place on the measurement port.
Small loop
Wrist strap
Secured to
strap pin
Tightening slide