X-Rite MA94, User Manual, Page: 12 / 53

M U L T I - A N G L E S P E C T R O P H O T O M E T E R
10
Using the Charging Station
The charging station has a separate indicator LED for each charging position. The LEDs illuminate
“red” when a battery pack is charging, amber when battery pack is close to a full charge, and
“green” when no battery is inserted or after the battery is fully charged. A battery pack takes
approx. 4 hours to reach a full charge from a completely discharged state.
1.
Insert the small plug from the AC adapter into the input on the side of the charging station.
2.
Plug the detachable line cord into the AC adapter and plug the line cord into the wall
receptacle.
3.
Position a battery pack over one of the charging locations with the locking tabs in the station
directly below the slots in the battery. Make sure the arrow on the top of the battery pack is
facing the LED end of the station.
4.
Lower the battery pack into position and slide it toward the LED until it stops. Depending on
the battery packs current charge state, the LED will illuminate "red", "amber", or "green"
when properly seated.
5.
After charging is complete, slide the battery in the opposite direction of the LED until it stops
and lift upward to remove.
AC adapter input
Battery arrow
LED indicator
LED indicator
Locking tabs
Note: The AC adapter
used for the charging
station is the same
adapter that is used to
power the instrument.